最大电流至2000A的数字式塑壳断路器。

The measuring amplifiers convert thermocouple signals into standard signals of 0...10V or 0(4)...20mA.

Thermocouples of the type K (nickel / chromium-nickel) or of the type J (iron / constantan) can be used. The devices have cold ...

The measuring transducers convert a PT100 / PT1000 signal into a linearized measuring signal 0...10V or 0/4...20mA (linearity error 0.1%).
...

The snap-on modules VM237 + VM238 are precision summation amplifiers with voltage or current output (10V/20mA).
Three negating and two non-negating inputs which can also be used as differential inputs, are at disposal. If the solder support...

The isolating amplifier series VM180-VM188 operates according to the principle of optoelectronic potential separation. It is distinguished by its high quality and an excellent price/performance ratio...

The amplifier was developed for the connection of foil strain gauges in a bridge circuit (four-wire technology), but they also can used as mV amplifier. 120兦 (total resistance) or greater sensors with output voltages of between 0.2...

The analog switch OT10 is suitable for non-contact switching of smallest signals up to 150V/100mA, without additional auxiliary energy. Compared to conventional relays, the device offers many advantages...

The OT1 and OT2 devices are optocouplers with push-pull output particularly suitable for the transmission of signals via long lines or in EMC-disturbed environment.
The signal status is indicated by a LED, the output is short circuit-proof...

The short circuit protected optocouplers are suitable for non-contact switching of valves, brakes, DC contactors, and other loads of up to 3Adc. For higher loads, the admissible output current can be multiplied by simply connecting...

The threshold switch KM211 can capture DC voltages of 10mV...200V. In order to be able to exactly set the desired limit value, the total range is divided into 6 measuring ranges as specified in the technical data...