直流无刷电机驱动器PortescapEBL驱动器

 
Enlarge
EBL-H-50-3 | As Shown

New High Performance Amplifier for Brushless Motors
无刷电机新的高性能放大器
•  Portescap introduces its new ROHS compliant EBL-H-50-03 Amplifier, specifically engineered for Portescap high performance Brushless motors.
    Portescap介绍他们新的适应EBL-H-50-03 放大器的ROHS，这是为高性能无刷电机特别设计的。

•  With a powerful speed range of 90,000 RPM, and a maximum current output of 12 amps, the amplifier provides a continuous current output of 3 amps and a supply voltage of 5.5-50 Volts.
    每分钟9万转的强大的速度范围，12安培最大电流输出，放大器提供1个3安培的连续输出电流和1个5.5到50伏特的电压。

•  Weighing in at under 2 oz, the new amplifier is able to provide a broad supply voltage range, which makes the driver capable of controlling the smaller 13mm BLDC motors to the larger 30mm motors.
不足二盎司的自重，新的放大器却能够提供了广泛的电源电压范围，从而能驱动和控制规模在13毫米到30毫米的无刷直流电动机。

•  Also noteworthy is the included thermal, short and over current protection. An optional feature allows for current limitation at start up to protect surrounding equipment, which can come in handy for things such as improving the life of a battery pack in a medical respirator, while the internal current ripple control minimizes increases in motor heat.
同样值得注意的是，包括热，短期和过电流保护。一项在启动后限制电流以保护周边设备可选功能是很有用途的，例如用内部电流脉冲将电动机散发的热量控制在最小以增加医疗呼吸机的寿命。

•  With increases protection and generous flexibility, this new amplifier is well suited for applications where efficiency, high acceleration and safety features are key, such as medical devices.
    凭借着保护措施的增加和广泛的灵活性，这个新的放大器有着诸多的应用，关键在于高效、高加速度和安全，如医疗器械。

This driver is suitable for Portescap B05 series, 16BH series, and 22BH series motors.
Product Specification
• Rated Voltage : 50.0 volts
• Mass : 42.0 g
这驱动器适合Portescap公司B05系列，16BH系列，和22BH系列电机。
产品规格：
额定电压:50伏特
质量:42克

This driver is suitable for Portescap B06, B11, B15 and nuvoDisc series motors.
Product Specification
• Rated Voltage : 50.0 volts
• Mass : 42.0 g
这驱动器适合Portescap公司的B06，B11,B15和nuvoDisc系列电机。
产品规格：
额定电压：50伏特
质量：42克