 永磁式电机 | |
 |  | |
| | | |
| |  Intorduction 产品说明 | |
| | | The most outstanding feature of the PL Series of lead screw
motors is the adoption of an injection molded lead screw and
thrust bearing, using molding technology patented by Minebea.
This construction has led to improved productivity and reductions
in the frictional load and moment of inertia. We can thus promise
you products of a high quality, coupled with a high performance.
Brackets, lead screws (screw pitch, length etc.) and FPCs can be
made to order, according to your requirements.
| | |
| | Application 应用
| |
| | | |
PL Lead Screw Type Motor
Head Drive for Floppy Drive
Pick Up Drive for CD
|
Reference characteristics 参考参数 |
| |
Motor Size 电机尺寸 | PL15S-020 | Number of Step per Rotation
每周转过步数 | 20 | Driver Method 驱动方式 | 2-2(Phase) | Driver Circuit 驱动电路 | BIPOLAR CONST V | Driver Voltage 驱动电压 | 5[V] | Coil Resistance/Phase 相电阻 | 10[ ] | Magnet Material 磁性材料 | Nd-Fe-B bonded magnet(MS70) | Holding Torque | 30[X10-4N.m] | Maximum PULL-IN Frequency | 1450[pps] |
|
Driver Frequency | PULL-OUT Torque | 400[pps] | 1400[pps] | 25[X10-4N.m] | 13[X10-4N.m] |
|
|
| |
| | Torque characteristics 力矩级 | |
| |
| | PL LEAD SCREW TYPE(at 5[V],10[])
力矩值仅供参考。
当使用电机时，一些因素如热传导及本身发热会出现。所以请在考虑发热条件后再在实际设备上应用
|
SwitchingSequence (Viewed from Lead Screw Side) |
| Lead Screw Spec | Detail of Screw | | |
Dimensions |
| |
| |
Values shown in the web site are representative of this type.
Design, Specifications are subject to change without notice.
 | |
| |
| |
产品简介：NMB PL电机 永磁式步进电机
